Unpacking & Installing - NEC NM-302E Owner's Manual And Cooking Manual

By following the basic steps on these two pages you will be able to quickly check that your oven
is operating correctly. Pay particular attention to the guidance on where to install your oven.
When unpacking your oven make sure you remove all accessories and packing. Check to make
sure that your oven has not been damaged during delivery.
Unpack your oven and place it on a flat level surface.
Place your oven on a flat, level surface but make sure there is at least 10 cm of space on the
top, rear and sides so there is air flow for ventilation. Exhaust outlets are located in the back and
side of your oven. Blocking the outlets can damage your oven. THIS OVEN IS DESIGNED FOR
BUILDING IN. (Not over a heat source)
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL
CATERING PURPOSES
UNPACKING & INSTALLING
GLASS TRAY
ROLLER REST
4