Specifi Cations - JVC LT-42A80SU Instructions Manual

Technical information
Updating the PR list (Digital channel only)
The TV will run the reception test (for digital channel) at midnight (3AM) on a daily basis.
If the TV detects channels that became receivable or if the TV was not able to receive a certain channel, a
message about updating the PR list will be displayed when the TV is turned on.
The reception test will only operate when the TV is in standby. It will not operate when the TV is turned on.
If the TV does not detect any channels that needs to be updated, a message will not be displayed.
Services have changed.
Do you want to update PR list?
Yes No
To update the PR list
1. Select "Yes" and press the OK button.
2. "Service Scan" menu is displayed.
Run the service scan to update the PR list
If "Reinstall" is set in "Mode" of "Service Scan" menu, All PR list setting will reset and all the reservations for
"Record" and "Remind" will be cancelled. If you want to leave those settings and just add channels, set the
"Mode" of "Service Scan" menu to "Add" (P. 43).
If "Add" is set in "Mode" of "Service Scan" menu, channels which the TV couldn't receive will not be deleted from
the PR list. To delete those channels manually
The service scan will take few minutes.
To cancel the update
Select "No" and press the OK button.
If you want to update the PR list later, select "No" and press the OK button. Next time you turn on the TV this
message will not be displayed but you can also update the PR list using "Service Scan" (P. 43).
57
"Service Scan" (P. 43).
"Edit PR list" (P. 45).
Specifi cations
(continued)
Model
Broadcasting systems
Colour systems
Channels and frequencies
Sound-multiplex systems
Teletext systems
Power requirements
Audio output (Rated power output) 6 W + 6 W
Speakers
Power consumption
[standby]
Screen size
(visible area size measured diagonally) 66 cm
Dimensions (W x H x D: mm)
[without stand]
Weights
[without stand]
Accessories
A CAM (Conditional Access Module) for watching pay-TV digital channels can be installed (P.8).
DC power can be supplied to the indoor aerial (P.55).
Terminal name
EXT-1
Input / Output
terminals
EXT-2
EXT-3
Input terminals
EXT-4 (HDMI 1)
EXT-5 (HDMI 2)
DIGITAL
AUDIO OUT
Output
terminals
Headphone
We may change the design and specifi cations without notice.
Main unit
LT-26DA8BJ LT-32DA8BJ LT-37DA8BJ
CCIR I
TV broadcast : PAL
External input : PAL, NTSC 3.58/4.43 MHz
Digital : E21-E68 (Frequency : 474 MHz-850 MHz)
Analogue :
UNITED KINGDOM : E21-E69 (UHF)
IRELAND : IR A-IR J, E2-E12, E21-E69 (VHF/UHF)
NICAM (I)
Digital : MHEG 5 UK profi le
Analogue : FLOF (Fastext), WST (World Standard System).
AC 220 V - 240 V, 50Hz
(12 cm x 5 cm) oval x 2 (16 cm x 4 cm) oval x 2
116 W 125 W 170 W
[1.6 W] [1.6 W] [1.6 W]
80 cm 92 cm
672 x 519 x 230 800 x 591 x 230 919 x 651.7 x 230
[672 x 471 x 107] [800 x 545 x 99] [919 x 603.7 x 108]
11.6 kg 14.3 kg 19.8 kg
[10.8 kg] [13.5 kg] [18.7 kg]
(See "Check accessories", P. 5)
Terminals / Connectors
Terminal type Signal type (IN)
Composite video,
Euroconnector x 1
Analog RGB
(SCART connector)
AUDIO L / R
Composite video, S-video,
Euroconnector x 1
Analog RGB
(SCART connector)
AUDIO L / R
Composite video,
Analogue component
(576i (625i) / 480i (525i),
RCA connectors x 5
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
HDMI
(576i (625i) / 480i (525i) /
HDMI connector x 1
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
OPTICAL connector x1
Stereo mini-jack x 1
(3.5 mm in diameter)
LT-42DA8BJ
10 W + 10 W
214 W
[1.2 W]
105 cm
1030 x 719.1 x 296
[1030 x 672 x 108]
23.9 kg
[22.1 kg]
Signal type (OUT) Notes
TV out
"T-V LINK"
Dubbing out
compatible
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
output
58