JVC LT-42A80SU Instructions Manual page 81

Troubleshooting
Problem
Wrong screen size
No picture, no sound
No sound
Green and distorted
screen
Some functions do not
work
"FEATURE NOT
AVAILABLE"
After confi rming all the conditions above,
press "OK" button again.
"NO RECORDING"
" NO RECORDING
POSSIBLE"
" NO RECORDING
MEDIA PROBLEM"
" NO RECORDING
DEVICE BUSY"
51
(continued)
Actions
Switch "SIZE" in "HDMI SETTING" to "1" or "2".
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "AUDIO" in "HDMI SETTING" to "DIGITAL" or "AUTO"
for HDMI devices, or "ANALOGUE" or "AUTO" for DVI devices.
(Not available for "EXT-5".)
Wait a little for the signal to stabilize when switching the
signal format for an "HDMI" device.
It is not a malfunction. Some functions in the menu do not
display depending on the situation.
Is the "T-V LINK" compatible device connected to "EXT-2"?
Is the SCART CABLE "Fully Wired"?
Is the "T-V LINK" compatible device turned on?
A problem occurs at the recorder.
The displayed video cannot be recorded.
The recorder is not ready for recording.
Check the videotape or DVD disc.
The recorder is recording another programme, or is playing.
page Problem
34
Black or white dots
appear on the screen
–
No picture, no sound
–
34
–
"Dolby Digital selected!
No analogue audio
available"
–
54
Forgot my PIN code!
54
–
Locked channels can
be watched without
inputting PIN code
–
When JVC or the
–
broadcasting station
informs you of the
software
–
"Services have
changed. Do you want
to Update PR list?" is
–
diplayed
Actions
LCD panels use fi ne dots ("pixels") to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light, or may light all
the time.
Please understand that this is not a malfunction.
Some digital channels cannot be watched on this TV.
When "Dolby Digital" is selected in "Digital Audio Output", the
sound of a programme containing "Dolby Digital" signals cannot
be output from the TV or the audio system connected to the
"AUDIO OUT" terminal.
When the channel is changed, a message will be displayed for
a few seconds.
To listen with the TV or audio system
Select a language without "(Dolby)" from "Audio Selection"
Switch "Digital Audio Output" to "PCM"
The default PIN code is "0000". If you forget the numbers that
you used to change the default PIN code, fi rst input "0081" in
the "Enter PIN code" and then register a new PIN code.
Once the PIN code is input, the lock function is released. If
you want to use the lock function again, turn the TV off and
then turn it on again.
Upgrade the tuner software by using the "Receiver Upgrade"
function.
Update the PR list (digital channels) "Updating the PR list"
page
–
55
56
29
41
39
–
41
57
52