Advertisement
Front panel controls:
Mic amp section:
1)
48v phantom switch.
2)
Phase reverse switch.
3)
-20db pad (reduction of high level input signals).
4)
Input select switch – selects input source
microphone/DI.
5)
Direct input specially designed for high impedance
sources (input impedance 10M).
6)
Gain knob from +22db to 60db.
7)
H.P.F. selectable two frequency toggle switch –
changes low cut frequencies at 12db/oct.
Control-room section:
8)
Source select switch: selects between three input
sources A, B, C, & cut.
9)
Monitor select switch: toggles between
main/alternative monitors.
10)
Control room level: main rotary fader for control room
monitors.
Dim switch: dims the control room level for fine mix
11)
balance adjustments
12)
Mono switch: selects control room monitoring between
mono/stereo mode.
13)
Mains power switch & power indicator.
.
4
Advertisement
