Front Panel Controls - Signal Audio Workshop CH2-M Owner's Manual

Front panel controls:

1. 48v phantom switch.
2. Phase reverse switch.
3. -20db pad (reduction of high level input signals).
4. Input select switch – selects input source
microphone/DI.
5. Direct input specially designed for high impedance
sources (input impedance 4.7m).
6. Tube gain knob from +22db to 60db.
7. H.P.F. selectable five frequency rotary switch –
changes low cut frequencies at 12db/oct.
8. Power Standby switch.
9. Tube filaments light indicator.
10. +300v power light indicator.
11. Source select switch: selects between three input
sources A, B, C, & cut.
12. Control room level: main rotary fader for control room
monitors.
13. Monitor select switch: toggles between
main/alternative monitors.
14. Dim switch: dims the control room level for fine mix
balance adjustments.
15. Mono switch: selects control room monitoring between
mono/stereo mode
.
4