Advertisement
Specifications:
Electronics structure (from in to out):
300 ohm mic input impedance & 600 ohm on balanced out.
Class-A discreet 10M ohm DI inputs on channels 1&2.
Gain: continuously variable from +22db to +60db.
-18 db pad SW, +48v phantom power switch, phase switch.
Passive 2-state 12db/oct high-pass filters 75Hz, 160Hz & off.
Frequency response 10Hz-40kHz +/- 0.4 db/120khz-2db!
Maximum output level: +27dbm on balanced out with 600 ohm
load.
Minimum signal path design (for maximum signal transparency).
Only 2 dual-op amps per channel (balanced in to balanced out).
Control-room section:
3 stereo source input select.
Mono sum switch for monitoring L+R.
Dim switch.
Control room level knob w/large & accurate scaling.
Speaker select for 2 pairs of monitors.
Fully passive I/O ¼" connectors (back panel).
Specially designed for monitoring & maximum signal transparency.
All internal routing functions are passive & terminated .
Dimensions MP-2:
H=3 units, W=19",D=13.4"
Shipping weight:
All spec's at RL=600Ohm.
Info subject to change without prior notice!
All legal rights reserved to Signal Audio Workshop!
7
Advertisement
