Page 1
SIZE : A5 MATERIAL : GREEN READ PAPER 75 G. PLASTIC BAG : 7 x 11 INCH PART NO. 7901-281995 PART NAME : MANUAL MET 60 REV.00 PRODUCT CODE : MET 60 : 113H-227300...
1. Installation instructions for the user and the qualitified installer 115 mm 50 mm Fig 2 Fig 3 4 x 35 mm 6 mm min. 4,5 mm max. 5,5 mm Fig 1 Fig 4 170 mm. 80 mm. Fig 5...
Page 3
90 mm. 90 mm. Fig 6 Warning: Warning: As with any electric appliance, failure to electrically As with any electric appliance, failure to electrically ground unit may result in serious injury or death. ground unit may result in serious injury or death. Micro Switch Micro Switch The Position Tabel...
1. All plumbing work must comply with national and The MET 60 is to be installed vertically on a wall (hot water applicable state and local plumbing codes.
Page 5
When carrying out any work, isolate the unit from the mains and shut off the water connection. - Clean the filter Disconnect the union nut, remove washer , filter and clean. Re-assemble in reverse order. Technical data MET 60 System design Closed Rated pressure 10 bar/1.0Mpa Nominal capacity ≤...
Page 6
2. Operating instructions for the user and the qualitified installer 2.1 Important information Advise the user about possible hazards. Hand over these instructions, to be kept for future reference. - Currently-applicable data on the supply rating plate. - Install the unit flush with the wall. Warning: - Piped supplementary heating is not permissible.
Need help?
Do you have a question about the MET 60 and is the answer not in the manual?
Questions and answers