Setup Menu - Inncom B573 User Manual

B573 User Manual
Revision 1.2, Issued 5/15/08

2. Setup Menu

Entering the 2. Setup menu requires you to enter a numeric password using the number buttons on the B573.
Two passwords exist as shown below. These passwords are hard coded into the B573 and can NOT be changed:
61959 : "Normal Setup Menu" access. Grants access to Setup menus 2.1 Network, 2.2 Device and 2.3 FLN5
Test Pattern (only for B573 configured as FLN5 RS-485 Floor bridge).
51962 : "Manufacturing Setup Menu" access. Grants access to Manufacturing Setup menus 2.10 MAC Address ,
2.11 Manufacturing Tests , and 2.12 NVRAM. The functions available in the "Manufacturing Setup Menus" are
normally not used by the typical user. The only function that would possibly be used is to access the 2.12 NVRAM
menu to change the "TCT Port Offset" value if the B573 is configured as an "MBX" to support TCTs. This is
covered in Section 1.5 on page 15 of this document.
277 · West Main Street· Niantic, CT · USA · 860-739-4468 · www.inncom.com
27