Unpacking & Assembly Instructions - Gamma 8800 Els Owner's Manual

Unpacking Instructions & Contents
Instructions for Unpacking and Preparing for Assembly
The stringing machine is shipped in three cartons, a large master carton for the stringing
machine base with tensioner module and accessories, a medium carton for the turntable
and mounting system and a smaller carton for the floor stand post and base legs. Please
save the cartons and packing materials for possible shipments in the future. Gamma
Sports cannot be responsible for machines that are not returned, shipped in their original,
undamaged packaging. The tools you will need to assemble the machine are provided
with the machine. Due to the weight of the tensioner unit, you may need the assistance of
someone to help lift the tensioner unit out of the carton.
Once the cartons are opened, remove all inner cartons and check to be sure that all parts
are present and accounted for.
Contents of Base & Leg Carton (MMU2-72)
(1) Lower Column
(1) Upper Column with Flange Plate
(1) Floor Plate
(1) Locking Knob Screw
(4) M8 x 35 Cap Screws w/Washers
(6) M6 x 20 Cap Screws w/Washers
(1) M8 x 20 Cap Screws for Height Adjustment
(1) String Reel Holder (M8 Threaded Pin), (1) Knob, (10) Spacers, & (2) M8 Washers
Contents of Mounting System Carton (MMU2-70)
(1) Turntable Assembly w/ String Clamp Base and Mounting Stands w/ Frame Support
Slide, Side Supports, and Adapters
(2) String Clamp
(1) Package of spare plastic adapters for mounting system supports
Contents of Large Master Carton (MMU2-98)
(1) Stringer Assembly Unit w/ Tensioner Module
(1) Power Cord
(1) Foot Pedal Tensioner Switch
(1) Tool Kit (contains side cutter, bent nose pliers, needle nose pliers, starting clamp)
(1) Straight Stringers Awl & (1) Pathfinder Specialty Awl
(1) Tools for assembly and maintenance
8800 Els
4