Advertisement
Self-Test
Press the MENU button up to when the
button and the unit will run self-test by built-in program. To go back to the functions press the
MENU button again.
Led Display
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the ENTER
button to store or it will automatically return to the main functions without any change after
idling 8 seconds. To go back to the main functions without any change press the MENU
button.
Fixture Hours
Press the MENU button up to when the
button and the display will show the number of working hours of the unit. To go back to the
functions press the MENU button again.
Software version
Press the MENU button up to when the
button and the display will show the version of software of the unit. To go back to the
functions press the MENU button again.
4. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be effected at once. Every time you turn the unit on, it will show
display, after that the unit will be ready to receive DMX signal or run the built in programs.
is blinking on the display. Pressing ENTER
is showing on the display. Pressing
is blinking on the display. Pressing ENTER
is blinking on the display. Pressing ENTER
8
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in
(show 0) or
nothing plugged into it, Its master LED will be constantly on and sound LED will flash to the
music. The other units will have to set in
into the DMX input jacks (daisy chain) and the slave led lights will constantly on.
4.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting to the 1/4"
microphone jack of the first unit, you will find that the remote control on the first unit will
control all the other units functions press the MENU button again.
Stand By
Function
Mode
4.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press the ENTER button to store or it will
automatically return to the main functions without any change after idling 8 seconds. To go
back to the main functions without any change press the MENU button. Please refer to the
following diagram to address your DMX512 channel for the first 4 units：
on the
(show 1) or
(show 2). Its DMX input jack will have
(slave mode), Their DMX cables plugged
Blackout the unit
1. Ø5 LED Strobe
Select show
2. Moon flower strobe
Show1-2
Sound (LED OFF)
LED ON
is showing on the display. Pressing ENTER
9
(master mode) and select
Advertisement
