American DJ Fusion FX Bar 2 User Instructions
Hide thumbs Also See for Fusion FX Bar 2:

Advertisement

Quick Links

User Instructions
Rev. 8/09
Unpacking:
can DJ
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contact-
ing customer support.
Introduction:
ing pursuit for creating high quality affordable intelligent fixtures. The
Fusion FX Bar 2 is a three-in-one DMX intelligent LED wash and moon-
flower fixture. This unit can be used as a stand alone fixture, or in a
Master/Slave configuration. The unit can has three operating modes:
sound active, 2 show modes, or controlled via DMX controller.
Customer Support:
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
To purchase parts online visit http://parts.americandj.com
Warning!
not expose this unit to rain or moisture.
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
PLEASE recycle the shipping carton when ever possible.
American DJ
®
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.americandj.com
Fusion FX Bar 2
Thank you for purchasing the Fusion FX Bar 2 by Ameri-
. Every Fusion FX Bar 2 has been thoroughly tested and has
®
The Fusion FX Bar 2 is part of American DJ's continu-
American DJ
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
.
®
American DJ Supply
- www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ Fusion FX Bar 2

  • Page 1 The Fusion FX Bar 2 is part of American DJ’s continu- ing pursuit for creating high quality affordable intelligent fixtures. The Fusion FX Bar 2 is a three-in-one DMX intelligent LED wash and moon- flower fixture. This unit can be used as a stand alone fixture, or in a Master/Slave configuration.
  • Page 2: General Instructions

    • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in safe and stable matter. The Fusion FX Bar 2 carries a 3 year (1095 days) limited warranty. • Power-supply cords should be routed so that they are not likely to...
  • Page 3: Power Supply

    512 data cables for DATA transmission in place of 3-pin. 5-pin DMX set on the rear panel of the Fusion FX Bar 2. Your unit and your DMX fixtures may be implemented in a 3-pin DMX line. When inserting stan-...
  • Page 4 0-2. Programs 1 & 2 are preset show, while “Sh 0” is American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 7 American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 8 ©...
  • Page 5 2. Either “OFF” (no LED inversion) or “ON” (LED inversion) will now American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 9 American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 10 ©...
  • Page 6: Operation

    ENTER. 1. The Fusion FX Bar 2 is a 16 DMX channel unit. See pages 13-14 Tap the UP or DOWN buttons until “ON” is displayed and press for a detailed description of the DMX traits.
  • Page 7 201 - 247 STROBING SLOW - FAST 248 - 255 FULL ON American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 13 American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 14 © ®...
  • Page 8: Troubleshooting

    1. Check that the DMX cables are connected properly and are of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the wired correctly (pin 3 is “hot”;...
  • Page 9 Fusion FX Bar 2 Notes Fusion FX Bar 2 Notes American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 17 American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 18 © ®...
  • Page 10: Specifications

    American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service@americandjeurope.com / www.americandjeurope.com Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 19 © ®...

Table of Contents