Advertisement
Topaz 250™
9
7
8
American DJ
- www.americandj.com - Topaz 250™ Instruction Manual Page 5
©
®
Control & Functions
1
2
3
4
5
6
7
10
11
�
�
�
�
Topaz 250™
1. Mirror - This is a highly reflective surface mirror specifically
designed to optimize and enhance beam output. Never use glass
cleaner that contains ammonia to clean the surface of the mirror (such
as Windex).
2. Lens - This is a fully focusing high quality lens. Focus the lens by
manually turning the lens in a clockwise or counter-clockwise direc-
tion.
3. Glass Filter - This unit comes with a built-in glass filter. This filter
may be removed at any time for a completely different effect. To remove
the filter unscrew the retaining thumb screw and gently pull the filter
out.
4. Fan - Cooling fan. For optimal performance keep this fan grill clean
at all times.
5. Lamp Assembly Retaining Screws - These two screw hold the
lamp assembly in place.
6. Lamp Assembly Cover - This plate accesses the lamp socket
assembly. This cover is held securely in place by a single thumb screw.
The fan is also attached to this cover.
7. Lamp Cover Retaining Screw - This thumb screw holds the lamp
socket assembly cover into place
8. Function Switch - This is a 3-way function switch. This unit can
be operated in three different mode all of which are controlled by this
switch.
9. Microphone - This microphone receives external low frequencies
to trigger the unit.
10. Breaker - A 5A built-in safety breaker to reduce the risk of electrical
shock or fire and protect the circuitry. In the case of a internal short or
power surge.
11. Power Cord - Connect only to a matching power outlet. Never
use this fixture is the ground prong has been removed or broken off.
American DJ
- www.americandj.com - Topaz 250™ Instruction Manual Page 6
©
®
Control & Functions
Advertisement
