Overview; Safety Signs, Symbols, And Labels - icetro SSM-180 User Manual

2.Overview

To become familiar with this product, be sure to read this manual carefully.
This product requires cleaning and maintenance activities as in other machines.
Any disassembly or cleaning mistakes may cause a product failure.
It is highly recommended for the person in charge to have immersion training for activities.

3.Safety Signs, Symbols, and Labels

The warnings and safety instructions in this manual do not cover all possible conditions and
situations.
While operating, moving or cleaning this product, manipulate it carefully based on common
sense. If a bad and non-understandable symptom happens, feel free to contact the
purchased site or service agency.
Danger
Warning
Caution
Caution
Important
8
This is the safety warning symbol. It is used to warn users of any potential
risk of injuries. To evade from the risk of injury or death, comply with the
safety requirements for the symbol.
If you neglect this symbol and wrongly use the product, it may cause
death or serious injury.
If you neglect this symbol and wrongly use the product, it may cause a
potential risk of death or serious injury.
If you neglect this symbol and wrongly use the product, it may cause a
potential risk of injury.
If you neglect this with no caution symbol and wrongly use the product, it
may cause a potential risk of property damage.
You must check the electrical rating on the nameplate of the product. The nameplate is
attached on the rear of the product. The nameplate specification has priority over
information in this manual. The electric circuit diagram of the product is attached inside of
the panel. In addition, the product specification is subject to change without prior notice.