Sterilizing The Site - icetro SSM-180 User Manual

Push the canister fully into the canister to fix in the
packing cushion and fixing latch.
(See Figure 14).
Use fresh material to remove the remaining sterilization solution on the surface
of the canister.
Afterwards, do not rinse the product.
To reuse the product after a long time, paint the packing cushion with edible grease as in
. Otherwise, noise may be heard from the product.
Caution
For correction, you have to get a charged service.

7.3.5 Sterilizing the site

The site sterilization can be performed additionally after parts sterilization but it cannot
replace the parts sterilization.
According to the food safety regulations and manufacturer specification, prepare
five liters of warm (45 to 60 ) sterilization solution (remaining chloride 100 ppm).
Fill the solution in the canister.
Use the proper brushes to wipe the surfaces projected above the solution level
and the lower area of the canister cover with the solution.
Attach the canister cover and operate the product for mixing the solution for about
two minutes. Drain the solution from the canister.
Use fresh material to remove the remaining sterilization solution on the surface of
the canister. Afterwards, do not rinse the product.
19