Avantgarde TBWC-110S3 User Manual page 21

TO REMOVE A SHELF
To remove a sliding shelf :
1. Remove all bottles
2. Pull out the shelf
3. Take out shelf by lifting the right side bracket and lowering the left side one, then pull out
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET
Your cabinet was designed to store a maximum number of bottles in total security.
•
We recommend that you observe the tips to optimize loading.
Spread your bottles out as evenly as possible over the shelves, so that the weight is not concentrated
•
in one area; also make sure your bottles do not touch the back of the cabinet, or the step at bottom.
Also make sure that the bottles are not all grouped together at the top or bottom of the cabinet.
•
Observe the loading instructions provided in section 5, according to the type of storage fixtures with
•
which your cabinet is equipped, AND NEVER STACK BOTTLES ON A SLIDING SHELF.
Never try to pull out more than one sliding shelf at a time.
•
PLEASE NOTE
Before modifying your cabinet's original configuration in any way, be sure to ask your dealer for advice.
12/27/2012
21