Maintenance; Impeller Removal And Installation - TOHATSU MD 35B2 JET Owner's Manual

M25 Jet Drive

MAINTENANCE

Impeller Removal and Installation

Rotating the driveshaft may cause the engine to crank over and start. To
prevent this type of accidental engine starting and possible serious injury
caused from being struck by a rotating impeller, always turn the ignition key
or lanyard stop switch to the "OFF" position and remove the spark plug leads
from the spark plugs while servicing the impeller.
1.
Position the key switch or lanyard stop switch to the "OFF" position.
2.
Remove the spark plug leads to prevent the engine from starting.
3.
Remove the six screws securing the water intake housing, and remove the
water intake housing.
�������
11 11 11