Running The Test Sequence - Siemens C55/2128 Service Manual

SIEMENS Pte Ltd
C55/2128 Level 2 Service Manual
Make sure that your CTS firmware is Version 3.01 or higher. For CMD 55 it must be
Version 4.03 and higher. Please check with the Service Info SB_0500 for the
CTS/CMD Hardware Options.
12.4.2

Running the test sequence

Insert a Test SIM card and a fully charged battery into the Siemens mobile phone
and place it onto the phone holder on the Antenna Coupler. Switch the RF switch
to INT ANT position and select the Start button to run the test sequence in the
configuration file.
Copyright © Siemens Pte. Ltd.
All rights reserved
ICM MP CCQ ASP/ASC
Siemenes Techincal Support Center
23 of 28
Internal Service Use Only