SIEMENS
Pte Ltd
C55/2128 Level 2 Service Manual
Step 9
O
nce the front cover has been removed,
proceed to remove the 6 screws on the fro
with a "T6" screw driver; as indicated by the re
circles.
Step 11
Once the screws has been removed, the PCB
can also be seperated from the back casingof
the phone. The antenna is built-in on the back
case.
Step 13
Fully disassembled C55
Copyright © Siemens Pte. Ltd.
All rights reserved
ICM MP CCQ ASP/ASC
Step 10
Once the screws has been removed, you
nt
would be able to see the internal single PCB.
d
Step 12
A
s it can be seen from the photo, the keypad
can also be separated from the front casing.
12 of 28
Siemenes Techincal Support Center
Internal Service Use Only