Saving The Tone Sequence - Siemens A40 User Manual

Saving the Tone
Sequence
You can save your numbers in your
Phonebook together with tone se-
quences (digits), e.g. for remote reply
of an answering machine.
.
Enter the number.
Hold down until a "+" ap-

pears (pause during connec-
tion setup).
.
Enter the digits.
 If necessary insert more
pauses to ensure that the
numbers are processed se-
curely on the receiver side.
Sending a Tone Sequence
A tone sequence can be entered man-
ually after a connection has been set
up:
Enter the numbers for the
.
tone sequence.
Service numbers
Your service provider can equip your
SIM card with service numbers. If this
case, you will see <Service numbers> as
an entry in your Phonebook.
„
[Menu] Phonebook
Scroll to the required service
*
number.
Press. The number is di-
:
alled.
Phonebook
,
„
<Service numbers>
Information Numbers
Your service provider can equip your
SIM card with information numbers.
These numbers can be stored together
in directories (e.g. hotels, weather).
The numbers or directories are auto-
matically available as entries in the
Phonebook.

If appears beside an entry, it can on-
ly be dialled in the local network.
Dialling Information Numbers
„
[Menu] Phonebook
Scroll to the required
*
directory.
[Select] Press to open the directory.
*
Scroll to the required entry.
Press. The number is di-
:
alled.
Active Line
„
[Menu] Phonebook
The line is active in the following exam-
ple. You can switch to Line .
R
<Active Line>

Press
[Line ] in this example.
,
„
<Info Numbers>
,
„
<Active Line>
J

[Line ]
>
to switch to
13