Routing - D-Link DIR-815 User Manual

Section 3 - Configuration
The Routing option is an advanced method of customizing specific routes of data through your network.
Enable:
To enable a route, check the box that is on the left side of
the route.
Interface:
Use the drop-down menu to specify if the IP packet must
use the WAN or LAN interface to transit out of the Router.
Destination:
Enter the IP address of the packets that will take this route.
Subnet Mask:
Enter the subnet mask to specify the subnet of the IP
packets that will take this route.
Gateway:
Enter the next hop that will be taken if this route is used.
Click the Save Settings button to save any changes made.
D-Link DIR-815 User Manual

Routing

53