Russia Pppoe (Dual Access) - D-Link DIR-815 User Manual

Section 3 - Configuration
Select PPPoE (Username/Password) from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide you
with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from
your computer. The software is no longer needed and will not work through a router.
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address:
Enter the IP address (Static PPPoE only).
User Name:
Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the password in the
next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect
Use the radio buttons to specify the reconnect mode. The user can
Mode:
specify a custom schedule or specify the On Demand, or Manual
option.
To specify a custom schedule, use the drop-down menu to select
one of the schedules that has been defined in the Tools> Schedules
window. To create a new schedule, click the New Schedule button
to open the Tools> Schedules window. Refer to "Schedules" on
page 78 for more information.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
DNS Addresses:
Enter the Primary and Secondary DNS Server Addresses (Static
PPPoE only).
D-Link DIR-815 User Manual
Manual Internet Connection Setup

Russia PPPoE (Dual Access)

34