Carrier ComfortPro PC6000 Operation & Service Manual page 18

NOTICE
Factory Default Duration Setting is 1 hour.
Range is 0.5 hrs - 10 hrs (in 0.5 hr
increments).
NOTICE
Factory Default Temperature Setting is
21°C / 70°F. Range is 18°C / 64°F to
30°C / 86°F.
62-11175 COMFORTPRO SERVICE MANUAL
Setting the Start Time/Day
1 Press .
2 Press or
"TIMER 1" or "TIMER 2" is displayed,
then press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting. The current start time is displayed.
5 Press or
6 Press to confirm each setting.
Setting the DURATION
1 Press .
2 Press or
"TIMER 1" or "TIMER 2" is displayed,
then press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting. The current duration time is displayed.
5 Press or
6 Press to confirm this setting. Or press
retain the current duration.
7 Press to exit.
Setting the TEMPERATURE for the Timer
1 Press .
2 Press or
"TIMER 1 or TIMER 2" is displayed,
then press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting. The current temperature is displayed.
5 Press or
6 Press to confirm this setting. Or press
retain the current temperature.
7 Press to exit.
HOURS
00000
until
TIMER 1
to display "SET START".
to set the hours, minutes and day.
HOURS
00000
until
TIMER 1
SET DURATION
to display "SET DURATION".
to scroll to the length of time to run the APU.
HOURS
00000
until
TIMER 1
to display "SET TEMP".
to scroll to the desired temperature.
APU
T OFF OFF
1
SET START
APU
T OFF OFF
1
to cancel and
APU T
OFF OFF
1
SET TEMP
to cancel and
1-9