Entering Password - Carrier ComfortPro PC6000 Operation & Service Manual

1-6
3 Press or
For example, if your password is "432" press
then press .
4 Repeat for each digit in the password.
5 Press again after entering the last digit. "NEW PASSWORD"
is displayed.
6 Repeat the above steps to enter the new password. "CONFIRM"
is displayed.
7 Enter the new password again, then press
PROTECT FUNCTIONS with a PASSWORD
1 Press .
2 Press or
"PASSWORD PROTECT"
is displayed, then press
If this menu item does not appear,
then you have not yet changed the
factory password from 000. Change
the password and then try again.
"ENTER PASSWORD" is displayed with three blank squares, one for
each digit in the password. The first square flashes.
3 Press or
displayed, then press
4 Repeat for each digit in the password.
5 Press again after entering the last digit.
The first feature that can be password protected is displayed with
"YES" or "NO" (indicating whether it is currently password protected).
6 Press or
7 Press to move to the next feature.
Or press or
1.3.2 Entering the Password
When you try to set up a function, you may be prompted to enter the password.
1 Press or
is displayed, then press
2 Repeat for each digit in the password.
3 Press again after entering the last digit.
until the first number in the password is displayed.
until
HOURS
00000
.
until the first number in the password is
.
to change the "YES" or "NO".
to skip to the next feature.
until the first number in the password
.
62-11175 COMFORTPRO SERVICE MANUAL
until "4" shows,
to exit this function.
APU
OFF OFF
PASSWORD
PROTECT