For Your Safety - Kyocera iBurst User Manual

• For your safety

-------- Danger Danger -------- --------
Danger Danger -------- --------
(If used improperly, may cause death or serious injury.)
Do not use with an abnormal condition, such as with emission of smoke or odor. It may
•
cause fire or electric shock.
Do not disassemble or remodel the product. It may cause fire or electrical shock.
•
Do not use or place the product at places with high humidity such as in the bath room or
•
near the humidifier. It may cause fire or electric shock. And do not touch the product with
wet hands.
------- Warning Warning ------ Warning Warning -------- -- -- -- ------ ------
(If used improperly, may cause disability or physical damage.)
Do not give a shock strong against the product, such as dropping and throwing. It becomes
•
the cause of failure. Moreover, do not ride on the product. It may become the cause of an
injury.
Do not put the product under direct sunshine or near equipment with high temperature
•
such as a stove and a heater. It may raise the temperature of the interior and cause fire.
Do not put the product at places with an extreme fluctuation of temperature, such as near
•
the air conditioner or a heater. The dew condensation may occur in the interior and cause
fire, electrical shock, and malfunction.
Do not put the product at places with oil and steams such as in the kitchen. In addition, do
•
not put it at dusty places and places where metal powder and toxic gas occur. It may cause
fire or electric shock.
Do not place the product on unstable places such as on an unsteady desk or slanted
•
surfaces. In addition, do not put any object on the product. It may loose balance and tumble,
or fall and cause injury.
When the thunder occurs in near, do not use the product and its peripheral equipment. It
•
may become the cause of an electric shock.
Do not touch the connector pins directly with your hands. Static electricity may affect the
•
components. As static electricity is created from both the cloth and the human body, before
putting or removing the product, release static electricity by touching a metal object such
as a small cabinet.
Do not use it in the intense place of vibration. It becomes the cause of failure.
•
-------- Caution Caution --------
Caution Caution
(If treated improperly, the equipment may not perform or work properly.)
Do not put the product at low temperature. The product may not function properly.
•
Do not put the product on the top of magnetic objects and places where electromagnetic
•
waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV,
radio, fluorescent light, inverter air conditioner, and electric kitchen appliances).
product will not be able to make communication properly if effected by magnetism or
electronic noise. Putting the product near TV or radio may cause RF receive error.
The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot
•
spring.
Data communication will be disabled or a data file may corrupt if the PC is turned off or the
•
product is separated from the PC during the communication. Important data must be
verified against the original data.
Kyocera Corporation
iBurst Modem Card iBurst Modem Card Model (U
iBurst iBurst Modem Card Modem Card
Q34T-EE-003 Rev. 1.01 Jan.15,2007
- 5 -
Model (UT T T T C) C) Manual Manual
Model (U Model (U C) C) Manual Manual
The