Adding New Data To The My Camera Window - Canon PowerShot S40 User Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Adding New Data to the My Camera Window

To add new data to the My Camera Window, you need to create the new data, save
it to the computer and add that file to the My Camera window.
Create New Data before Adding to the My Camera Window
Start by creating the start-up image or sound and saving it to the computer.
Creating a Start-Up Image
Create an image using an image editing application program, such as ArcSoft
PhotoImpression. Create the file in the JPEG format at a size of 320 x 240
pixels.
Creating a Sound
Record a sound using a sound recorder, such as SimpleSound, which is
commonly bundled with Macintosh computers. After you have recorded it
with SimpleSound, use ArcSoft VideoImpression to convert the file to the
WAV format. The sound duration should conform to the following.
Type
Start-Up Sound
Shutter Sound
Operating Sound
Self-Timer Sound
• Please note that files not meeting the above criteria cannot be saved to
the camera.
• To learn how to create a sound file, see the ImageBrowser Software User
Guide (p. 4), a PDF file.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Duration in Seconds
11.025 kHz
1.0 sec. or less
0.3 sec. or less
0.3 sec. or less
2.0 sec. or less
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8.000 kHz
1.3 sec. or less
0.4 sec. or less
0.4 sec. or less
2.0 sec. or less
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
99