Installing The Usb Twain Driver/Usb Wia Driver - Canon PowerShot S40 User Manual

Installing the USB TWAIN Driver/USB WIA Driver

• Be very careful to follow the steps below in order to install the driver
software.
1. Install one of the following drivers from the Canon Digital Camera
Solution Disk (p. 20).
Windows 98/2000: USB TWAIN Driver
Windows Me:
- Copy the required files to your computer.
2. Connect the camera to the computer with the USB cable.
- Complete the steps required to install the driver and then close the installer.
USB WIA Driver Installation Precautions
• You can install the USB WIA Driver if you are using Windows Me. In addition,
you should read "USB WIA Driver Limitations" below before installing the driver.
USB WIA Driver Limitations
• When you have set the WIA Driver to start a particular application program
when you connect the camera, the program may cause an error message similar
to the following to appear: "TWAIN data source not found. Reinstall the scanner
software." If this happens, select [WIA-camera model] in the application
program as the TWAIN device. Your camera model name will appear in place of
the "camera model" in the brackets above.
• You cannot use ZoomBrowser EX's auto start function when the USB WIA Driver
is installed.
USB WIA Driver
23