Table of Contents
Advertisement
The N8WTS
The N8WTS is a fully functional inwall touchscreen PC with all the necessary
input/output ports to control any subsystem or automation hardware in your
home. The N8WTS has the following I/O ports as seen in Figure 1.2: USB 2.0,
Ethernet 10/100Mb/s, Serial RS232, VGA Out, Compact Flash type I/II, PS/2
keyboard & mouse, and Audio line out/line in/mic.
Figure 1.1 I/O Ports
The unit comes preconfigured with Windows XP Professional or XP Embedded and
all necessary drivers from the motherboard driver CD. For home control applications
the user has the option to install their favorite flavor of home control software which
will provide the custom, intuitive, button-type interface or interactive voice
recognition for controlling the hardware within the home.
The N8WTS requires only a small amount of power. It is powered by an internal
power supply with standard AC input wired directly to the unit with standard interior
home grade 12 or 14-gauge wire (see Figure 5). The power supply is universal; it
can accept 90-264VAC.
The unit does not need a dedicated circuit, special grounding, special ventilation, or
any other special treatment except that it should be handled carefully and stay as
dry as possible. The ventilation slots on the case should not be blocked or covered
except by what is normally covered by the mounting bracket. The unit mounts flush
to the wall with the exception of the slightly raised bezel which attaches to the face
after installation.
9
June 2008 v1.2
Advertisement
Table of Contents
