Table of Contents
Advertisement
1) Install wall mount bracket.
A rectangular hole should be cut out of the wall corresponding to the size of the
bracket. It is easiest to trace the outer diameter of the bracket with a pencil for
proper sizing. Pick a location where you know for certain that you can get
power (inside the wall) to the N8. Once the hole has been cut, slide the bracket
into the wall opening. The bracket can be screwed onto a stud or can be secured by
bending the numerous perforated metal tabs. The tabs are more than sufficient to
secure the unit in place.
Figure 1.4
14
June 2008 v1.2
Advertisement
Table of Contents
