Sanyo VPC-CS1 Service Manual page 19

AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (–930<=ZIM2<=64)
AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (–876<=ZIM3<=70)
AF_I_MID4: ZIM4
ZIM4: infinity adjustment value of focus at zoom position
middle4 (–772<=ZIM4<=142)
AF_I_MID5: ZIM5
ZIM5: infinity adjustment value of focus at zoom position
middle5 (–568<=ZIM5<=100)
AF_I_MID6: ZIM6
ZIM6: infinity adjustment value of focus at zoom position
middle6 (–390<=ZIM6<=126)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (–96<=ZIT<=204)
PZ_ADJ_INDEX: PZI
PZI: index of zoom barcode adjustment (0<=PZI<=2)
IRIS_GAIN: g
g: adjustment value of gain (0<=g<=255)
IRIS_OFFSET: o
o: adjustment value of offset (0<=o<=255)
4. Lens Adjustment (80 cm)
Camera
Preparation:
POWER switch: ON
Adjustment condition:
Siemens star chart (A3)
Fluorescent light illumination with no flicker
Illumination above the subject should be 700 lux ± 10%.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
80 0.5 cm
Siemens
star chart
Adjustment method:
1. Set the siemens star chart 80 ± 0.5 cm from lens surface
so that it becomes center of the screen (zoom wide and
tele). Set the camera and the chart in a straight, and do
not put optical systems (mirror and conversion lens etc.)
2. Double-click on the DscCalDi.exe.
3. Click the "Focus", and Click the "Yes".
4. Lens adjustment value will appear on the screen.
5. Click the OK.
DscCalDi
!
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ATAD: adjustment value of focus temperature A/D
(250<=ATAD<=893)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–102<=ZW<=102)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–110<=ZM1<=86)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(–930<=ZM2<=64)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(–876<=ZM3<=70)
AF_MID4: ZM4
ZM4: adjustment value of focus at zoom position middle4
(–772<=ZM4<=142)
AF_MID5: ZM5
ZM5: adjustment value of focus at zoom position middle5
(–568<=ZM5<=100)
AF_MID6: ZM6
ZM6: adjustment value of focus at zoom position middle6
(–390<=ZM6<=126)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–96<=ZT<=204)
– 19 –
x
Focus Result
AF_TEMP_AD: 421
AF_WIDE: -38
AF_MID1: -34
AF_MID2: -16
AF_MID3: -2
AF_MID4: 16
AF_MID5: 42
AF_MID6: 61
AF_TELE: 91
OK