Check Points Of Every 200 Hours - Nanni 5.280HE Workshop Manual

03-M Series, WSM

(6) Check Points of Every 200 Hours

Changing Engine Oil (for 124 mm (4.88 in.) Depth Oil Pan)
CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (1).
5. Fill new oil up to upper line on the dipstick (2).
IMPORTANT
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CD/
CE/CF/CF-4/CG-4.
• Use the proper SAE Engine Oil according to ambient
temperature.
Above 25 °C (77 °F)
0 °C to 25 °C (32 °F to 77 °F)
Below 0 °C (32 °F)
Models
D1503-M
D1703-M
D1803-M
V2203-M
V2403-M
*90 mm (3.54 in.) oil pan depth is optional.
(1) Drain Plug
S-26
DIESEL ENGINE
SAE 30 or SAE 10W-30
SAE 10W-40
SAE 20 or SAE 10W-30
SAE 10W-40
SAE 10W or SAE 10W-30
SAE 10W-40
Oil pan depth
124 mm (4.88 in.) *90 mm (3.54 in.)
7.0 L 5.6 L
1.85 U.S.gals 1.48 U.S.gals
9.5 L 7.6 L
2.51 U.S.gals 2.01 U.S.gals
(2) Dipstick
W1022765
KiSC issued 08, 2012 A