Parts Guide - Life Ionizers 9000 User Manual

Parts Guide

Tubing Hose
Power Cord
1. Refer to the diagrams on the following pages before
beginning installation.
2. Be aware that a 110v outlet (USA) or 220v outlet is required. If
the outlet is located under the sink, make sure it is not near
the water source.
3. If after installation the water has an odor, you may need to
install a pre-filter. Please consult your LIFE Ionizer® dealer.
4. How to use reagent drops: (BTB Chemical). Put 2-3 drops in
approximately 1 ounce of water to be tested. Compare color
to color chart provided in kit to determine pH level.
www.LifeIonizers.com/Support
Reagent Drops
(pH Test Drops)
BTB Chemical
Counter top
Diverter Valve
Alkaline water
outlet hose
(flexible)
User Manual
9
Faucet (for
9200 model)
75
9000/9100/9200