Installation of Parts Guide
Diverter Valve
Reagent Drops
(pH Test Drops)
BTB Chemical
Extra
Fuse
Suction Cup
Located in the Power Switch
at the bottom of the machine
1. Refer to the diagrams on the following page before beginning
installation.
2. Be aware that a 110v outlet (USA) or 220v outlet is required.
If the outlet is located under the sink, make sure it is not near
the water source.
3. If after installation the water has an odor, you may need to
install a pre-filter. Please consult your LIFE Ionizer® dealer.
4. How to use reagent drops. (BTB Chemical). Put 2-3 drops in
approximately 1 ounce of water to be tested. Compare color
to color chart provided in kit to determine pH level.
www.LifeIonizers.com/Support
1/4" Tubing Hose
pH Color
Chart
Faucet
Flexible Hose
For M9 UC NG
Cold Water
Tubing/Cable
Protector
Faucet Adapter
9
User Manual
Connect
Alkaline/Acid
Hoses
Faucet
Connector
75
M9/M9 UC NG