Summary of Contents for Mountain Buggy buggypod Smorph2
Page 1
20:44 Page 1 User Guide UK/US IMPORTANT: KEEP FOR FUTURE REFERENCE Buggypod® from Revelo Ltd Granted European Patent No. 1747137 Patent Pending U.S.A Application No. 11/578594 Revelo Limited offers customer support via telephone and email. Please contact us on 0870 850 3463 (UK only, Mon-Fri) or visit www.buggypod.com...
Page 2
- way we could find. connector bar adaptor Looking after your Buggypod® Buggypod® is a clip-on seat that attaches to the side of a pushchair using Warnings, Guarantee, Accessories universal attachment brackets which fit most pushchairs. Buggypod® can be folded open so that the older child can be harnessed into the seat and enjoy a safe and comfortable ride alongside the younger child in the buggy.
Page 3
WARNING: Avoid serious injury by falling or sliding out. • The Buggypod® can be attached to most buggies and pushchairs including twin pushchairs Always use the safety harness. and 3-wheelers. The mounting bracket strap can be tightened easily around most buggy and pushchair frames.
Page 4
Components mounting bracket to the pushchair Wheel (a), Buggypod® frame(b), connector bar (c), connector bar adaptor* (d), mounting brackets & friction sleeve (e), mounting bosses (g), allen key x 2 (h), end plugs (i), secondary axle (j), mounting blocks (k).
Page 5
Buggypod® the leash correct height Unfold the footrest (s) by opening The Buggypod needs to be level Affix wheel (a) to wheel axle (q), Attach the long section of the leash (o) Slip the mounting bosses over the 4 Make sure that the Buggypod®...
Page 6
Buggypod by undoing the popper on the seat cover. You can then loop You must remove the Buggypod from the brackets if you want to fold the pushchair. the holding strap around your pushchair bar to create a tighter hold.
Page 7
User Guide. the textile covers and rinse the Buggypod® in fresh water to remove any salt deposits. Wipe the textile covers with a damp cloth – do not rinse. Remove the wheel (a) and lubricate the inside, as well as the primary axle (q) and secondary axle (j).
Page 8
Backrest Addendum August 2009 1. Open fastener at the top of both sides of the seatcover 2. Open zip 3. Open poppers on top of frame 4. Recline backrest Note: • The recline may also be adjusted by positioning the front mounting bracket up to 8 cm higher than the rear bracket •...
Need help?
Do you have a question about the buggypod Smorph2 and is the answer not in the manual?
Questions and answers