Assembly Instructions - Kärcher K 1800 IB Operator's Manual

ASSEMBLY INSTRUCTIONS

Step 1
Slide the handle through the
accessory rack.
3
Step 3
Check oil level. Oil level should
always be between the "FULL" and "ADD"
marks on the dipstick. Be sure the machine is
level when checking the oil level. (Refer to the
engine's operating manual for seasonal
grades.)
Step 5
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Step 2
Align the holes of the accessory
rack to the handle and fasten the four (4) screws.
Step 4
Insert the detergent tray into one
of the slots of your choice and screw in the
fastener. Fill with the proper detergent for
your cleaning project.
Important! Do not run the engine with a
high or low oil level as this can cause
engine damage. If you have further
questions regarding the engine, please
refer to the engine's operating manual
included with the unit.
You are now ready to
operate your Karcher
Pressure Washer.