DVD Display Error Messages
The following errors could display on the video screen.
Disc Format Error: This message displays if a disc
is inserted upside down, if the disc is not readable, or if
the disc format is not compatible.
Disc Play Error: This message displays if the
mechanism cannot play the disc. Scratched or damaged
discs will cause this error.
Region Code Error: This message displays if the
region code of the DVD is not compatible with the region
code of the DVD player.
Load/Eject Error: This message displays if the disc is
not properly loaded or ejected.
No Disc: This message displays when you try to play
or eject a disc that is not in the player.
X: An X displays, in the upper left corner of the video
screen, if the operation that has been selected is
not currently available.
3-106
DVD Distortion
Video distortion can occur when operating cellular
phones, scanners, CB radios, Global Position
Systems (GPS)*, two-way radios, mobile fax, or
walkie talkies.
It might be necessary to turn off the DVD player when
operating one of these devices in or near the vehicle.
®
*Excludes the OnStar
System.
Cleaning the DVD Player
When cleaning the outside DVD faceplate and buttons,
use only a clean cloth dampened with clean water.
Cleaning the Video Screen
When cleaning the video screen, use only a clean
cloth dampened with clean water. Use care when
directly touching or cleaning the screen, as damage
may result.