Grandstream Networks GXV3175 User Manual page 42

Ring Bac ck Tone
Busy Ton ne
Reorder Tone
Confirma ation Tone
Call-Wai ting Tone
PSTN di sconnect Ton ne
Default R Ring Cadence e
MAINTEN NANCE PAGE E DEFINITIO
Maintena ance/Network k Settings
Address Type
PPPoE
Static IP
Alternate e DNS Server r
Layer 3 Q Qos
Layer 2 Q QoS
802.1Q/V VLAN Tag
Layer 2 Q QoS
802.1p P Priority Value
802.1x M Mode
Proxy
Maintena ance/Wifi Set ttings
Grandstr ream Networ ks, Inc.
North American sta andard.
Frequ uencies shoul d be configur
high p pitch sounds.
ax: f1=val,f2= =val[,c=on1/of
Synta
(Freq uencies are i n Hz and cad
ON is s the period o of ringing ("O
silenc ce. In order to o set a contin
will rin ng ON ms an nd a pause of
three cadences are e supported.
This defines the ring cadenc
c=200 00/4000;
NS
This s selects the typ pe of IP addre
When n PPPoE is s selected, the
Accou unt ID, PPPoE E Password,
When n Static IP is s selected, the u
Defau ult Gateway, D DNS Server 1
This f field sets the a alternate DNS
This f field defines the layer 3 Q
Prece edence, Diff-S Serv or MPLS
This f field contains s the value us
value is 0.
This a assigns the pr riority value o
is 0.
This f field sets 802 2.1x Mode. T
select ted, users wil l be required
This f field sets HTT TP Proxy, HT
HTTP P Proxy, other r protocols ca
Other r Protocol".
GXV3175 USER MANU
FIRM MWARE VER RSION 1.0.3.4
red with know wn values to av
ff1[-on2/off2[- -on3/off3]]];
dence on and off are in 10m
On time" in 'm ms') while OF
nuous ring, OF FF should be
f OFF ms and d then repeat
ce for the p phone. The
ess assigned : DHCP, PPP
user needs to enter the
PPPoE Serv ice Name.
user needs to enter IP addr
1 and DNS Se erver 2.
S server for th he user.
QoS parame eter. It is the
S. The Default t value is 0.
sed for layer 2 VLAN tag
of the Layer2 Q QoS packets
The default va alue is disabl
to enter Iden ntity and MD5
TTPS Proxy, FTP Proxy o
an be applied d by checking
UAL
40
void uncomfo ortable
ms)
FF is the per riod of
e zero. Otherw wise it
t the pattern. Up to
default settin ng is:
PoE or Static I IP.
following: P PPoE
ress, Subnet M Mask,
value used for IP
ging. The D Default
. The Default value
ed. If EAD-M MD5 is
Password.
or No Proxy. Using
g the box "Ap pply to
P Page 42 of 13 30
Updated : 11 /2011