movistar Home Station ADSL Installation Manual page 6

Start using your ADSL...
5. Connecting the router with your computer. Two options are avilable
You may either connect your computer to the router with an Ethernet cable if
they are close enough or b y means a wireless network. Furthermore, you
can simultaneously have some equipments connected to the
router using the Ethernet cable and others,
as laptops, through the wireless network.
A. Connection with Wireless network
You can use the wireless network if your
computer has
installed or it is integrated into your
equipment.
Wifi network is enabled by default in
your router.
If the Wifi network is not activated (Wifi
LED switched off), you should press the
Wifi/WPS button in the router back side
within 5 seconds.
Next step is to configure the computers
on your wireless network in accordance
with the parameters of your wireless
router.
More information at User Manual on Advanced Settings CD.
6
a wireless adapter
Default configuration parameters of
your wireless network are shown on the
label at the bottom of your router
If you have an external
wireless device (PCMCIA
or USB adapter), install
it with the help of the
CD provided with it.
If you have a wireless device already
integrated into your computer, make
sure that it is enabled with the help of
your operating system.