Recommended Segway Pt Operation Pre-Ride Checklist - Segway x2 Turf Maintenance Manual

Recommended Segway PT Operation Pre-Ride Checklist

Thoroughly inspect your Segway Personal Transporter (PT) before each use. Refer to the Segway
PT Reference Manual and this guide for information concerning the topics presented here.
Check tire pressure
15 PSI- i2
4 PSI – x2 & x2 turf
Check for tire wear
i2 – center rib is worn flush with the tires surface.
x2 – diamond pattern on center rib is no longer visible
x2t – tire tread depth is less than 3/32" (2.38mm)
Power on the Segway PT, confirm that the battery level
is displayed on the InfoKey is at least at 4 bars
Ensure that there is no visible
damage to the PT
Check that the LeanSteer Frame is
standing straight and upright as
illustrated here (Figure A)
Check the LeanSteer Frame for
tightness
Torque to 11 Nm
Ensure that the rider mats are intact, secured and free
of debris
© 2010 Segway Inc. All rights reserved.
October, 2010
Segway PT Preventive Maintenance Guide
12
Figure A
22743-00001 Rev aa