Checking Tyre Pressures; Checking The Oil Level; Filling Up With Oil; Changing The Engine Oil - Kärcher KMR 1250 B User Instructions

Karcher lawn sweeper user manual
Hide thumbs Also See for KMR 1250 B:
Table of Contents

Advertisement

KMR 1250 B

Checking tyre pressures

Checking the oil level

Filling up with oil

Changing the engine oil

User Instructions
n Park the sweeper on a level surface.
n Check air pressure and adjust pressure as required.
Air pressure for front and rear wheels = 6 bar
n Park the sweeper on a level surface.
ç Pull out the dipstick.
n Wipe the dipstick clean and re-insert it in the filler hole.
n Pull out the dipstick again and check the result.
The oil level should be between the MIN and MAX marks.
If the oil level is below MIN – top up with oil.
If the oil level is above MAX – drain off the surplus.
n Insert the dipstick back into the filler hole.
n Pour engine oil type SAE 15W40 into the hole for the
dipstick.
Caution! Danger to the environment from engine
oil
After carrying out an oil change, ensure that the waste oil is
passed to an appropriate collection point or official disposal
company.
Caution,
n Run the engine until it reaches its normal operating tem-
perature.
n Make sure the sweeper is standing on a level surface.
n Open the unit cover.
n Place a drip pan under the engine.
ç Hold the end of the drain tube over the drip pan and let
the old oil run out.
n Close off the end of the drain tube again.
n Pour engine oil into the filler hole.
Capacity = 1.1 litres
n Check the oil level with the dipstick – see "Checking the
oil level".
n Wipe up any oil spillage and dispose of the waste oil
appropriately.
English
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

1.091-1041.091-124

Table of Contents