Table of Contents
Advertisement
SD/MMC Recorder Setup
6,
1.
Press Button "B" for 2 seconds then release to enter SD/MMC recorder setup function
2.
Press "Select" for 1 second to increase the parameter figure.
3.
Press "Next" for 1 second to select different parameters.
4.
Under USER mode, the Bluetooth ON/OFF setting function will be disabled. Press button
"B" for 1 second to record, recording once per press button.
5.
Under AUTO mode, the recording is as follows:
Whenever setting up, the power of the device must be turned off then on again to
reactivate the signal.
(The default of Recorder is AUTO.)
Speed
0 Km/h
Under 10 Km/h
Under 40 Km/h
Under 70 Km/h
Under 100 Km/h
Over 100 Km/h
Record
No record
Record once per 2 seconds
Record once per 5 seconds
Record once per 8 seconds
Record once per 10 seconds
Record once per 20 seconds
8
T-368 User's Guide
v1.0
Advertisement
Table of Contents
