Table of Contents
Advertisement
3. Operation
3.1 Getting Start
Step 1: Battery Installation
(a) Slide the power switch to "OFF" position.
(b) Press the "PUSH" button then slide the bottom cover off.
(c) Insert the Li-ion battery into the compartment. Note the orientation of the battery.
(d) Slide the bottom cover back to locked condition.
Step 2: Charge
Please charge the battery to full capacity when first time to use. Connect the attached adaptor cord to the
mini USB jack, as shown in the following figure.
The battery indication is with dual-color LEDs. The
The LED indication for the battery status is described in the following.
Battery low -----------------------------------------------------------------
Battery in charging --------------------------------------------------------
Battery charging suspended (protection when
charge timer over or battery overheat) -----------------
Charge completes or battery in normal capacity ---------------------- both LEDs off
green LED
will be on until charge completes.
Red LED
Green LED
Green LED
10
flashing
steady on
flashing
T-368 User's Guide v1.0
Advertisement
Table of Contents
