Table of Contents
Advertisement
Please put a SD/MMC card in the slot before turning on the device.
The SD/MMC card should be formatted to
4, Bluetooth/Backlight usage
1.Under normal operation status, press button "A" for 1 second and then release to turn
off/on Backlight.
2.Under normal operation status, press button "B" for 1 second and then release to turn
off/on Bluetooth.
Under Recorder USER mode, the Bluetooth ON/OFF setting function will be
disabled. If you want to turn on/off Bluetooth under USER mode, please use
Bluetooth setup described in 5. Display Setup below.
5,
Display Setup
(Please refer to Appendix: Time Zone Table for time zone adjustment.)
1. Press button "A" for 2 seconds then release to enter into setup menu.
2. Press "Select" for 1 second to increase the parameter figure.
3. Press "Next" for 1 second to select different parameters.
4. After finishing setup, press "Exit" for 1 second to back to operation status.
Whenever setting up, the power of the device must be turned off then on again to
reactivate the signal.
FAT
file system.
(The default of Bluetooth/Backlight is ON.)
7
T-368 User's Guide v1.0
Advertisement
Table of Contents
