Sending Data To The Host Computer; Lost Connection To Host - Motorola Symbol CR0078-P Cradles Quick Reference Manual

Quick Reference Guide

Sending Data to the Host Computer

The cradle receives data from the scanner via a wireless radio connection and
transmits it to the host computer via the host cable. The scanner and cradle must
be paired for successful wireless communication.
Pairing
Pairing registers a scanner to the cradle so that the scanner and cradle can
exchange information. The CR0078-P Series operates in the following modes:
scanner-to-cradle, point-to-point, multi scanner-to-cradle and multipoint-to-point.
In scanner-to-cradle mode, the scanner is paired to the cradle by inserting the
scanner into the cradle. In multi scanner-to-cradle mode, up to seven scanners
can be paired to one cradle. A multipoint bar code must be scanned to activate
this feature.
When the scanner is inserted in the cradle, a low-high beep sequence indicates
successful pairing and connection to the remote device. A long low, long high
beep sequence indicates unsuccessful pairing. Refer to the
Product Reference Guide, p/n 72-131700-xx
NOTE If the battery is off when the scanner is inserted in the cradle, a
high-low-high-low beep sequence indicates power up.

Lost Connection to Host

If scanned data does not transmit to the cradle's host, ensure that all cables are
firmly inserted and the power supply is connected to an appropriate AC outlet. If
scanned data still does not transmit to the host, reestablish a connection with the
host:
Disconnect the power supply from the cradle.
1.
Disconnect the host interface cable from the cradle.
2.
Wait three seconds.
3.
Reconnect the host interface cable to the cradle.
4.
Reconnect the power supply to the cradle, if required.
5.
Reestablish pairing with the cradle by inserting the scanner into the cradle.
6.
Symbol DS6878
for more information.
7