Table of Contents
Advertisement
iCanServer540R User's Guide
5.6. Alarm Device Setup
Test alarm output and describe the condition of alarm.
Sub Field
Field/Button
/Button
Alarm Device
Test
OFF
Device 1, 2
Alarm Device
Sensor 1, 2,
Active
3, 4
Condition
Ch n Motion
Duration
Figure 5-8. Alarm Output Setup
Test alarm devices. Click on On/Off for testing
Small box with white background indicates the status of the
relay by On/Off.
ON
On the alarm output (close the relay contact)
Off the alarm output (Open the relay contact)
Setup the condition of activating each alarm device. Select
sensor or motion detection as the condition.
Check at the box at the left of to allow alarm generation upon
sensor input.
Check at the box at the left to allow alarm generation upon
Motion detection on Channel n.
Set the duration of Alarm annunciation.
Description
Rev.1.0 (Nov. 2006)
31
Advertisement
Table of Contents
