Table of Contents
Advertisement
iCanServer540R User's Guide
5.5. Sensor & Capture Setup
This is the setup page for conditions of video capture. The video capture can be triggered either
by activated alarm sensor or motion detection as setup by this page. When the video capture
condition is med, the situation is notified to users through iNVR. Captured video is stored on the
HDD of the iCanServer540R.
Sub Field
Field/Button
/Button
Sensor 1, 2,
Sensor Setup
3, 4
Enable Urgent
Recording
Video Capture
Condition
Figure 5-7. Sensor & Capture Setup
Select sensor type. There are two types of sensors which are
Normal Open and Normal Close.
Check at the box to enable recording by pressing the URGENT
switch.
The iCanServer540R supports 2 types of conditions which are
Description
Rev.1.0 (Nov. 2006)
29
Advertisement
Table of Contents
