Table of Contents
Advertisement
iCanServer540R User's Guide
the IP sharing device to forward packet data with unique port number (RTSP and HTTP) to unique
internal IP address (local IP address). If you only plan to access multiple units from within a local
area network, you do not need to change the RTSP and HTTP port numbers, unless other IP
sharing devices sit in-between the client and the IP video products. For more detailed information
regarding the use of IP sharing device refer to the document
IP-sharing-device].
3.2. Connecting to xDSL/Cable Modem
1. Follow through steps 1 to 4 in Section 2.5 to assign IP address and other network parameters
to iCanServer540R.
2. Install iCanServer540R and connect it to xDSL or Cable modem as in Figure 3-2.
Figure 3-2. Connecting the iCanServer540R to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of the
changed IP address to the user over e-mail when the IP address is changed in floating IP
[Use of Private IP network using
②
Rev.1.0 (Nov. 2006)
15
Advertisement
Table of Contents
