Sony PRS-505 Service Manual page 4

PRS-505
QQ
3 7 63 1515 0
NOTE THE IC1001 ON THE MAIN BOARD
REPLACING
Replacement of IC1001 on the MAIN board used in this set re-
quires a special tool
NOTE THE IC301, IC953, IC1106, IC1201, IC1202 AND
IC1203 ON THE MAIN BOARD REPLACING
When IC301, IC953, IC1106, IC1201, IC1202 and IC1203 on the
MAIN board is damaged, exchange the new MAIN board for the
MAIN board which IC damaged
NOTES WHEN REPLACING THE INK INDICATOR
ELEMENT ASSY, MAIN BOARD AND FLASH ROM
(IC1203)
When the INK INDICATOR ELEMENT ASSY, MAIN board, or
FLASH ROM (IC1203) is replaced, you need to change the LUT.
TE
L 13942296513
www
.
4
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
REMOVING/ATTACHING THE SOFT COVER
• Removing the soft cover
Pull the tab of soft cover towards
Remove Sony's Reader in the direction of
• Attaching the soft cover
Insert the tab of the soft cover in the hole
Reader.
Pull the tab of the soft cover towards
Insert Sony's Reader in the direction of
cover.
Check that the tabs of the soft cover are completely inserted in
the holes of Sony's Reader.
Note: Note that the tab of the soft cover may become deformed,
if you strongly pull the tab too much.
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
.
.
of Sony's
.
to attach it to the soft
0 5 8 2 9 9 4 2 8
m
9 9
9 9