4. System installation and
configuration
This session will introduce how to install and configure JetCon 2502 Ethernet over
VDSL Extender and also introduce VDSL2 technology according to the following
sequences.
4-1. Install and wire
4-2. DIP Switch configuration
4-3. VDSL2 Technology
4-4. Available transmission distance and rate
4-5. Line impedance of region Telecom Company
4-1. Install and Wiring
JetCon 2502 is an Ethernet over VDSL Extender which adopted 2 RJ-11
connectors for the connection of Line and VDSL communication; the Ethernet
supports RJ-45 for 10/100Mbps. About the connectors, please refer to figure
2-2-2 in chapter 2.2.
In figure 4-1-1, the architecture uses traditional 1 pair twisted cable between
central office (CO site) and remote (CPE site) to achieve data and voice
communication over VDSL 2 technology without wire reconstruction.
Figure 4-1-1
11