Maintenance / Cleaning; Troubleshooting; Technical Specifications; Please Note - Laserworld ES-400 RGY Manual

Manual / Bedienungsanleitung: ES-400 RGY, ES-300 RGBV
1
2
3
4
5
6
7
8
9
10
11
12
*: not for all patterns.

Maintenance / cleaning

Always disconnect from the mains when the device is not in use or before cleaning it.
Open the device by removing the 4 screws of the top cover (2 upper screws at back/frontpanel). Remove
any deposits of dust, especially at the fan. Check for condensed fog fluid inside, if so, clean and rearrange
the position of laser and or hazer.
an unusual high amount of diffuse light can be seen inside the
cleaner and a paper towel. Never look directly into the light source. Always disconnect from the
mains when the device is not in use or before cleaning it.

Troubleshooting

Problem
No function / fan not working
Effects don't change to the beat of the music
Problems with DMX control
Device not working, but fan working

Technical specifications

•
Power supply: AC 85-250V,
•
Ambient temperature: +10°C ... +35°C
•
Power consumption: 40 W
•
Operation modes: DMX 512, automatic, music mode
•
Lasersources: aircooled DPSS laser (green), laser diode (red and blue/violet)
•
Optical power (at the laser):
ES-400 RGY: min. 300mW, max. 400mW, >80mW 532nm green, >220mW 655nm red
ES-300 RGBV: min. 220mW, max. 300mW, >40mW 532nm green, >110mW 655nm red, >70mW
405nm blue/violet
•
Beam: ca. 3mm/1mrad
•
Laser class: 3b
•
Scanning system: fast stepping motors 3-8kpps
•
Weight: 4.5 kg
•
Dimensions: 23 x 27 x 16 cm (W x D x H)
•
Loudness: <70db

Please note

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. Laserworld cannot be made liable for damages caused by incorrect
installations and unskilled operation! This manual is subject to change without notifice. Contact your local
dealer for an update, or check our website www.laserworld.com. Errors and omissions expected.
For service contact your dealer, or Laserworld. Only use Laserworld spare parts.
mode: 0-69 Laser off; 70-139 sound mode; 140-209 automatic mode,
210-255 DMX mode
patterns / animations
strobe (with increasing speed)
Pointspeed
horizontal movement*
vertical movement*
zoom / size*, 0..10 no effect, 11..92 increasing size, 93..146 automatic
small to large, 147..200 dto large to small, 201..255 small to large to
small...
Colour: 0..19, 20..39, etc. single colours (3 for RGY, more for RGBV),
above Patterns
Reset: above 200 (shortly)
Rotation X (width), 0..150 static rotation, 151..255 automatic rot.
Rotation Y (height), analogue to ch 9
Rotation Z, 0..180 static rotation, 181..217 automatic rotation clockwise,
218..255 automatic rotation counterclockwise
Mirrors need cleaning, when a "halo" is noticeable around the beam, or
Possible cause
Check mains connection
Adjust sensitivity with the dial on the front.
Check if device isn't in DMX or autom. mode
Check DMX address selection
Turn device off for ca. 1 Minute.
Page / Seite 4 of / von 8
device.Clean the mirrors with window
Version / Stand: January 11