Panasonic WJ-NV200VK Installation Manual page 54

Set up recording for individual cameras [Advanced recording setup]
Set up items such as the image capture size, frame rate and image quality for individual cameras.
Clicking the [Advanced >] button on the [Recording setup] tab will open the advanced setup page.
[Model]
The model of a registered network camera will be displayed.
(Blank: Camera is not registered)
[Compression]
The compression method selected when registering camera
will be displayed.
[Image capture size]
Select a resolution for images to be recorded.
<When the aspect ratio is 4:3>
QVGA(320x240)/ VGA(640x480)/ SXVGA(1280x960)/
SXVGA(800x600)
<When the aspect ratio is 16:9>
QVGA(320x180)/ HVGAW(640x360)/ HD(1280x720)/
FHD(1920x1080)
Default: VGA(640x480)
Note:
• If two or more cameras with the image capture size of
"FHD(1920x1080)", the image quality of "XF" and the
frame rate of "10 ips" or more are connected, images
may not be recorded at the configured rate.
• Depending on the model of the camera, the camera may
reboot when the image capture size is changed. The
reboot will be detected as a communication error, but
that is not a malfunction.
Important:
• The available image capture sizes may differ depending
on the model of the camera and the compression meth-
od.
[Rate] (Frame rate) (☞ Page 52)
[Quality] (Image quality) (☞ Page 52)
[Audio]
Select whether or not to record audio together with images.
On: Audio will be recorded.
Off: Audio will not be recorded.
Default: Off
54
[Recording]
Select whether or not to apply schedule recording.
On: Applies schedule recording.
Off: Does not apply schedule recording.
Anytime: Applies 24-hour recording every day regardless
of the schedule settings.
Default: On
[Saving]
Select whether or not to apply the HDD saving mode.
Depend: Applies the HDD saving mode.
Except: Does not apply HDD the saving mode. Performs
recording at the selected frame rate.
Default: Depend
[Referenced recording days] (☞ Page 52)
[Back] button
Click the button after completing the settings. The screen
returns to the [Recording setup] tab.